Shaft Coupling(คัปปลิ้ง)
จำหน่ายคัปปลิ้ง สินค้าคุณภาพดี นำเข้าจากประเทศจำหน่ายอะไหล่
“ยินดีให้คำปรึกษาฟรี สินค้าดีมีคุณภาพ จัดส่งรวดเร็วตรงเวลา”
Tyre flex coupling
- Rubber flex coupling are easy to install and fit. By eliminating
- most vibration. They also eliminate most noise, improving working
- conditions and lengthened machine service life. Even under severe
- conditions they require absolutely no lubrication
UNIVERSAL JOINTS COUPLING
- High torsional and no backlash
- the key point of Disc coupling design is the laminated straight sided flex pack an assembly of the stainless steel elements
- Unlimited service life
DISC COUPLING
- High torsional and No backlash
- The key point of Disc coupling design is The laminated straight sided flex pack an assembly of the stainless steel elements
- Unlimited service life
CHAIN COUPLING
- High efficiency, flexibility, capability and durability
- Three major part two hardened teeth sprockets and one as double standard roller chain
CROWN PIN COUPLING
- Transmits power smoothly
- Available absorption of shock load and vibration
- No Lubrication
MICRO COUPLING
- Metalflex size 40 maximum catalogue misalignments:
Radial = 0,15 mm, Axial = 0,6 mm, Angular = 2° - Misalignments required for the installation: Radial = 0,05 mm
(33%), Axial = 0,1 mm (16%), Angular = 0,5° (25%) - Metalflex 40 is suitable of the application because (33+16+25)%
= 74%, less than 100%.
JAW COUPLING
- Accommodate parallel angular and axial displacement
- Very easy to install when used with Taper bushes
- No Lubrication, No maintenance required
GEAR SLEEVE COUPLING
- Lubrication free combination of steel with polyamide ensure good sliding propertees
- Leads to Low maintenance and Low wear operation
- Wide temperature range -25 °c to + 80 °c
Taper grid coupling
- Metalflex size 40 maximum catalogue misalignments:
Radial = 0,15 mm, Axial = 0,6 mm, Angular = 2° - Misalignments required for the installation: Radial = 0,05 mm
(33%), Axial = 0,1 mm (16%), Angular = 0,5° (25%) - Metalflex 40 is suitable of the application because (33+16+25)%
= 74%, less than 100%.
Gear Coupling
- Sight weight,Small size, Long lift and very little loss of transmitting power
- Permits paralle, angular and end floating misalignments by crown gear from of hub teethments
- Unlimited service life
